Bell MTS

Open and close all of the list items at once using expand all or collapse all control with the enter key. Or use the enter key to expand and collapse the following individual list items.

List Item Closed Front Panel Lights / Function

Key	Item	Function
1	Power	The Power light displays the Modem's current status. If the Power light glows steadily green, the Modem is receiving power and fully operational. When the Power light is rapidly flashing, the Modem is initializing. If the Power light glows red when the Power cord is plugged in, the Modem has suffered a critical error and technical support should be contacted.
2	Ethernet	The Ethernet light illuminates when the Modem is connected to a computer via its yellow Ethernet port.
3	Wireless	The Wireless light illuminates when the Modem’s wireless radio is turned on.
4	DSL	The DSL light illuminates when the Modem is connected to a DSL line and the unit is able to synchronize to the DSL signal from the ISP. When it flashes, the Modem's built-in DSL modem is training for the DSL service.
5	Internet	When the Internet light glows steadily, the Modem is connected to the DSL provider. A red light indicates some sort of PPPoE issue (ie: authentication).
6	USB	The USB light illuminates when the Modem is connected to a computer via its USB port.

List Item Closed Rear Panel Function

Key	Item	Function
1	DSL	DSL connection with a phone cord from the phone jack to the modem.
2	USB	Can be used in place of an Ethernet cable.
3	Ethernet	Ethernet 10/100 Base-T RJ-45 port, connects to the network card in your computer.
4	Power	DC power adapter connector.
5	Switch	On/off toggle switch to control power to the modem.